Sustainable Supply Chain Network Design: A Review on Quantitative Models Using Content Analysis

Document Type : Review Article

Authors

1 Department of Industrial Management, Faculty of Management, University of Tehran, Tehran, Iran

2 School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran

Abstract

The purpose of this paper is to develop a systematic literature review on the subject of sustainable supply chain network design during 1990-2016, through a review of 261 papers.
In this study, qualitative technique for conducting a systematic literature review was used. To systematize and make the literature review more accurate, content analysis method was used that include data collection, coding, analysis and interpretation of data. Several tables and figures were developed to provide a better interpretation of the literature. The results show that: 1. Researches has been growing dramatically in this field, especially since 2008; 2. Most research has been conducted in five countries; 3. The most of quantitative models of SCND have published respectively in five top journals; 4. Generally, the researchers were more interested in: single-objective, linear programming, single-period, multi-product, capacity-limited facilities, multi-mode, reverse and environmental models, than other types of models and considerations; 5. In phase of modeling and solving, the authors have used more of mathematical programming (specifically MILP) and commercial solvers. The general contribution of this paper is in its addressing the topic of Sustainable Supply chain Network Design. Supply chain network design (SCND) is one of the strategic problems at the intersection of disciplines such as management, strategy, logistics, and operational research. Moreover, this work specifically contributes to understanding sustainability and identifies research gaps and characteristics of the scientific papers on this topic.

Keywords


Abdallah, T., Diabat, A., & Rigter, J. (2013). Investigating the option of installing small scale PVs on facility rooftops in a green supply chain. International Journal of Production Economics, 146(2), 465-477.‏
Abdallah, T., Diabat, A., & Simchi-Levi, D. (2012a). Sustainable supply chain design: a closed-loop formulation and sensitivity analysis. Production Planning & Control, 23(2-3), 120-133.‏
Abdallah, T., Farhat, A., Diabat, A., & Kennedy, S. (2012b). Green supply chains with carbon trading and environmental sourcing: Formulation and life cycle assessment. Applied Mathematical Modelling, 36(9), 4271-4285.‏
Adenso-Díaz, B., Lozano, S., & Moreno, P. (2016). How the environmental impact affects the design of logistics networks based on cost minimization. Transportation Research Part D: Transport and Environment, 48, 214-224.‏
Ahmadi, M., Seifi, A., & Tootooni, B. (2015). A humanitarian logistics model for disaster relief operation considering network failure and standard relief time: A case study on San Francisco district. Transportation Research Part E: Logistics and Transportation Review, 75, 145-163.‏
Akgul, O., Shah, N., & Papageorgiou, L. G. (2012). An optimisation framework for a hybrid first/second generation bioethanol supply chain. Computers & Chemical Engineering, 42, 101-114.‏
Alçada-Almeida, L., Coutinho-Rodrigues, J., & Current, J. (2009). A multiobjective modeling approach to locating incinerators. Socio-Economic Planning Sciences, 43(2), 111-120.‏
Allaoui, H., Guo, Y., Choudhary, A., & Bloemhof, J. (2018). Sustainable agro-food supply chain design using two-stage hybrid multi-objective decision-making approach. Computers & Operations Research, 89, 369-384.‏
Altmann, M., & Bogaschewsky, R. (2014). An environmentally conscious robust closed-loop supply chain design. Journal of Business Economics, 84(5), 613-637.‏
Alumur, S. A., Nickel, S., Saldanha-da-Gama, F., & Verter, V. (2012). Multi-period reverse logistics network design. European Journal of Operational Research, 220(1), 67-78.‏
Ameknassi, L., Aït-Kadi, D., & Rezg, N. (2016). Integration of logistics outsourcing decisions in a green supply chain design: a stochastic multi-objective multi-period multi-product programming model. International Journal of Production Economics, 182, 165-184.‏
Amin, S. H., & Zhang, G. (2012a). An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach. Expert Systems with Applications, 39(8), 6782-6791.‏
Amin, S. H., & Zhang, G. (2012b). A proposed mathematical model for closed-loop network configuration based on product life cycle. The International Journal of Advanced Manufacturing Technology, 58(5-8), 791-801.‏
Amin, S. H., & Zhang, G. (2013a). A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return. Applied Mathematical Modelling, 37(6), 4165-4176.‏
Amin, S. H., & Zhang, G. (2013b). A three-stage model for closed-loop supply chain configuration under uncertainty. International Journal of Production Research, 51(5), 1405-1425.‏
Ansari, Z. N., & Kant, R. (2017). A state-of-art literature review reflecting 15 years of focus on sustainable supply chain management. Journal of cleaner production, 142, 2524-2543.‏
Aras, N., & Aksen, D. (2008). Locating collection centers for distance-and incentive-dependent returns. International Journal of Production Economics, 111(2), 316-333.‏
Azadeh, A., Zarrin, M., & Salehi, N. (2016). Supplier selection in closed loop supply chain by an integrated simulation-Taguchi-DEA approach. Journal of Enterprise Information Management, 29(3), 302-326.‏
Azevedo, S. G., Govindan, K., Carvalho, H., & Cruz-Machado, V. (2013). Ecosilient Index to assess the greenness and resilience of the upstream automotive supply chain. Journal of Cleaner Production, 56, 131-146.‏
Bagherinejad, J., & Hassanpour, A. (2016, January). Bi-objective robust closed-loop supply chain network design with considering various recovery options. In Industrial Engineering (ICIE), 2016 12th International Conference on (pp. 19-26). IEEE.‏
Bai, Y., Ouyang, Y., & Pang, J. S. (2016). Enhanced models and improved solution for competitive biofuel supply chain design under land use constraints. European Journal of Operational Research, 249(1), 281-297.‏
Balaman, Ş. Y. (2016). Investment planning and strategic management of sustainable systems for clean power generation: An ε-constraint based multi objective modelling approach. Journal of Cleaner Production, 137, 1179-1190.‏
Balaman, Ş. Y., & Selim, H. (2015). A decision model for cost effective design of biomass based green energy supply chains. Bioresource technology, 191, 97-109.‏
Balaman, Ş. Y., & Selim, H. (2016). Sustainable design of renewable energy supply chains integrated with district heating systems: A fuzzy optimization approach. Journal of cleaner production, 133, 863-885.‏
Baud-Lavigne, B., Agard, B., & Penz, B. (2014). Environmental constraints in joint product and supply chain design optimization. Computers & Industrial Engineering, 76, 16-22.‏
Beamon, B. M., & Fernandes, C. (2004). Supply-chain network configuration for product recovery. Production Planning & Control, 15(3), 270-281.‏
Beheshtifar, S., & Alimoahmmadi, A. (2015). A multiobjective optimization approach for location‐allocation of clinics. International Transactions in Operational Research, 22(2), 313-328.‏
Berger, C., Savard, G., & Wizere, A. (1999). EUGENE: an optimisation model for integrated regional solid waste management planning. International Journal of Environment and Pollution, 12(2-3), 280-307.‏
Bernardi, A., Giarola, S., & Bezzo, F. (2013). Spatially explicit multiobjective optimization for the strategic design of first and second generation biorefineries including carbon and water footprints. Industrial & Engineering Chemistry Research, 52(22), 7170-7180.‏
Beullens, P. (2004). Reverse logistics in effective recovery of products from waste materials. Reviews in Environmental Science and Bio/Technology, 3(4), 283-306.‏
Bloemhof-Ruwaard, J. M., Van Wassenhove, L. N., Gabel, H. L., & Weaver, P. M. (1996). An environmental life cycle optimization model for the European pulp and paper industry. Omega, 24(6), 615-629.‏
Bojarski, A. D., Laínez, J. M., Espuña, A., & Puigjaner, L. (2009). Incorporating environmental impacts and regulations in a holistic supply chains modeling: An LCA approach. Computers & Chemical Engineering, 33(10), 1747-1759.‏
Bouzembrak, Y., Allaoui, H., Goncalves, G., & Bouchriha, H. (2011, May). A multi-objective green supply chain network design. In 2011 4th International conference on logistics (LOGISTIQUA). Hammamet (Vol. 31, pp. 357-361).‏
Bouzembrak, Y., Allaoui, H., Goncalves, G., & Bouchriha, H. (2013). A multi-modal supply chain network design for recycling waterway sediments. International Journal of Environment and Pollution, 51(1-2), 15-31.‏
Bouzembrak, Y., Allaoui, H., Goncalves, G., Masson, E., Bouchriha, H., & Baklouti, M. (2010, May). Sustainable multimodal supply chain design for recycling waterways sediments. In 8th International Conference of Modeling and Simulation-MOSIM10, May (pp. 10-12).‏
Brandenburg, M., Govindan, K., Sarkis, J., & Seuring, S. (2014). Quantitative models for sustainable supply chain management: Developments and directions. European Journal of Operational Research, 233(2), 299-312.‏
Cabral, I., Grilo, A., & Cruz-Machado, V. (2012). A decision-making model for lean, agile, resilient and green supply chain management. International Journal of Production Research, 50(17), 4830-4845.‏
Cagno, E., Magalini, F., & Trucco, P. (2008). Modelling and planning of Product Recovery Network: the case study of end-of-life refrigerators in Italy. International Journal of Environmental Technology and Management, 8(4), 385-404.‏
Cambero, C., & Sowlati, T. (2016). Incorporating social benefits in multi-objective optimization of forest-based bioenergy and biofuel supply chains. Applied Energy, 178, 721-735.‏
Cardoso, S. R., Barbosa-Póvoa, A. P., & Relvas, S. (2016). Integrating financial risk measures into the design and planning of closed-loop supply chains. Computers & Chemical Engineering, 85, 105-123.‏
Caruso, C., Colorni, A., & Paruccini, M. (1993). The regional urban solid waste management system: A modelling approach. European Journal of Operational Research, 70(1), 16-30.‏
Chaabane, A., Ramudhin, A., & Paquet, M. (2011). Designing supply chains with sustainability considerations. Production Planning & Control, 22(8), 727-741.‏
Chaabane, A., Ramudhin, A., & Paquet, M. (2012). Design of sustainable supply chains under the emission trading scheme. International Journal of Production Economics, 135(1), 37-49.‏
Chanchaichujit, J., Saavedra-Rosas, J., Quaddus, M., & West, M. (2016). The use of an optimisation model to design a green supply chain: A case study of the Thai rubber industry. The International Journal of Logistics Management, 27(2), 595-618.‏
Chandiran, P., & Surya Prakasa Rao, K. (2008). Design of reverse and forward supply chain network: a case study. International Journal of Logistics Systems and Management, 4(5), 574-595.‏
Chandra, C., & Grabis, J. (2007). Supply chain configuration: concepts, solutions, and applications. Springer Science & Business Media.‏
Charles, A., Lauras, M., Van Wassenhove, L. N., & Dupont, L. (2016). Designing an efficient humanitarian supply network. Journal of Operations Management, 47, 58-70.‏
Chen, M. J., Hsu, Y. F., & Wu, Y. C. (2014). Modified penalty function method for optimal social welfare of electric power supply chain with transmission constraints. International Journal of Electrical Power & Energy Systems, 57, 90-96.‏
Chibeles-Martins, N., Pinto-Varela, T., Barbosa-Póvoa, A. P., & Novais, A. Q. (2016). A multi-objective meta-heuristic approach for the design and planning of green supply chains-MBSA. Expert Systems with Applications, 47, 71-84.‏
Chopra, S. and Meindl, P. (2007). Supply Chain Management: Strategy, Planning, and Operation, Prentice‐Hall, Upper Saddle River, NJ. 
Chouinard, M., D’Amours, S., & Aït-Kadi, D. (2008). A stochastic programming approach for designing supply loops. International Journal of Production Economics, 113(2), 657-677.‏
Christopher, M., & Peck, H. (2004). Building the resilient supply chain. The international journal of logistics management, 15(2), 1-14.‏
Corsano, G., Vecchietti, A. R., & Montagna, J. M. (2011). Optimal design for sustainable bioethanol supply chain considering detailed plant performance model. Computers & Chemical Engineering, 35(8), 1384-1398.‏
Coskun, S., Ozgur, L., Polat, O., & Gungor, A. (2016). A model proposal for green supply chain network design based on consumer segmentation. Journal of Cleaner Production, 110, 149-157.‏
Costi, P., Minciardi, R., Robba, M., Rovatti, M., & Sacile, R. (2004). An environmentally sustainable decision model for urban solid waste management. Waste management, 24(3), 277-295.‏
Cruz, J. M., Nagurney, A., & Wakolbinger, T. (2006). Financial engineering of the integration of global supply chain networks and social networks with risk management. Naval Research Logistics (NRL), 53(7), 674-696.‏
Cruz-Rivera, R., & Ertel, J. (2009). Reverse logistics network design for the collection of end-of-life vehicles in Mexico. European Journal of Operational Research, 196(3), 930-939.‏
Das, K. (2012). Integrating reverse logistics into the strategic planning of a supply chain. International Journal of Production Research, 50(5), 1438-1456.‏
Das, K., & Chowdhury, A. H. (2012). Designing a reverse logistics network for optimal collection, recovery and quality-based product-mix planning. International Journal of Production Economics, 135(1), 209-221.‏
Datta, S. (2012). Multi-criteria multi-facility location in Niwai block, Rajasthan. IIMB Management Review, 24(1), 16-27.‏
Dehghanian, F., & Mansour, S. (2009). Designing sustainable recovery network of end-of-life products using genetic algorithm. Resources, Conservation and Recycling, 53(10), 559-570.‏
Demirel, E., Demirel, N., & Gökçen, H. (2016). A mixed integer linear programming model to optimize reverse logistics activities of end-of-life vehicles in Turkey. Journal of Cleaner Production, 112, 2101-2113.‏
Demirel, N. Ö., & Gökçen, H. (2008). A mixed integer programming model for remanufacturing in reverse logistics environment. The International Journal of Advanced Manufacturing Technology, 39(11-12), 1197-1206.‏
Deqqaq, H., & Abouabdellah, A. (2016, October). A bi-objective optimization for a green distribution network with transportation modes selection. In Intelligent Systems: Theories and Applications (SITA), 2016 11th International Conference on (pp. 1-6). IEEE.‏
Devika, K., Jafarian, A., & Nourbakhsh, V. (2014). Designing a sustainable closed-loop supply chain network based on triple bottom line approach: A comparison of metaheuristics hybridization techniques. European Journal of Operational Research, 235(3), 594-615.‏
Diabat, A., & Simchi-Levi, D. (2010). A carbon-capped supply chain network problem. Institute of Electrical and Electronics Engineers.‏
Diabat, A., Abdallah, T., Al-Refaie, A., Svetinovic, D., & Govindan, K. (2013). Strategic closed-loop facility location problem with carbon market trading. IEEE Transactions on engineering Management, 60(2), 398-408.‏
Du, F., & Evans, G. W. (2008). A bi-objective reverse logistics network analysis for post-sale service. Computers & Operations Research, 35(8), 2617-2634.‏
Du, L., Wu, J., & Hu, F. (2009, August). Logistics network design and optimization of closed-loop supply chain based on mixed integer nonlinear programming model. In Computing, Communication, Control, and Management, 2009. CCCM 2009. ISECS International Colloquium on (Vol. 1, pp. 414-417). IEEE.‏
Duque, J., Barbosa-Póvoa, A. P. F., & Novais, A. Q. (2010). Design and planning of sustainable industrial networks: Application to a recovery network of residual products. Industrial & Engineering Chemistry Research, 49(9), 4230-4248.‏
Dutta, P., Das, D., Schultmann, F., & Fröhling, M. (2016). Design and planning of a closed-loop supply chain with three way recovery and buy-back offer. Journal of Cleaner Production, 135, 604-619.‏
Easwaran, G., & Üster, H. (2010). A closed-loop supply chain network design problem with integrated forward and reverse channel decisions. Iie transactions, 42(11), 779-792.‏
Elhedhli, S., & Merrick, R. (2012). Green supply chain network design to reduce carbon emissions. Transportation Research Part D: Transport and Environment, 17(5), 370-379.‏
Elia, J. A., Baliban, R. C., Xiao, X., & Floudas, C. A. (2011). Optimal energy supply network determination and life cycle analysis for hybrid coal, biomass, and natural gas to liquid (CBGTL) plants using carbon-based hydrogen production. Computers & Chemical Engineering, 35(8), 1399-1430.‏
Elkington, J. (1998). Partnerships from cannibals with forks: The triple bottom line of 21st‐century business. Environmental Quality Management, 8(1), 37-51.
El-Sayed, M., Afia, N., & El-Kharbotly, A. (2010). A stochastic model for forward–reverse logistics network design under risk. Computers & Industrial Engineering, 58(3), 423-431.‏
Erkut, E., Karagiannidis, A., Perkoulidis, G., & Tjandra, S. A. (2008). A multicriteria facility location model for municipal solid waste management in North Greece. European Journal of Operational Research, 187(3), 1402-1421.‏
Eskandarpour, M., Dejax, P., Miemczyk, J., & Péton, O. (2015). Sustainable supply chain network design: An optimization-oriented review. Omega, 54, 11-32.‏
Eskandarpour, M., Zegordi, S. H., & Nikbakhsh, E. (2013). A parallel variable neighborhood search for the multi-objective sustainable post-sales network design problem. International Journal of Production Economics, 145(1), 117-131.‏
Faccio, M., Persona, A., Sgarbossa, F., & Zanin, G. (2011). Multi-stage supply network design in case of reverse flows: a closed-loop approach. International Journal of Operational Research, 12(2), 157-191.‏
Fahimnia, B., & Jabbarzadeh, A. (2016). Marrying supply chain sustainability and resilience: A match made in heaven. Transportation Research Part E: Logistics and Transportation Review, 91, 306-324.‏
Fahimnia, B., Tang, C. S., Davarzani, H., & Sarkis, J. (2015). Quantitative models for managing supply chain risks: A review. European Journal of Operational Research, 247(1), 1-15.‏
Farahani, R. Z., Rezapour, S., Drezner, T., & Fallah, S. (2014). Competitive supply chain network design: An overview of classifications, models, solution techniques and applications. Omega, 45, 92-118.
Fernandes, A. S., Gomes-Salema, M. I., & Barbosa-Povoa, A. P. (2010). The retrofit of a closed-loop distribution network: the case of lead batteries. In Computer Aided Chemical Engineering (Vol. 28, pp. 1213-1218). Elsevier.‏
Fink, A. (2005). Conducting research literature reviews: From the internet to paper. Sage.‏
Fleischmann, M., Beullens, P., BLOEMHOF‐RUWAARD, J. M., & Van Wassenhove, L. N. (2001). The impact of product recovery on logistics network design. Production and operations management, 10(2), 156-173.‏
Fleischmann, M., Krikke, H. R., Dekker, R., & Flapper, S. D. P. (2000). A characterisation of logistics networks for product recovery. Omega, 28(6), 653-666.‏
Fonseca, M. C., García-Sánchez, Á., Ortega-Mier, M., & Saldanha-da-Gama, F. (2010). A stochastic bi-objective location model for strategic reverse logistics. Top, 18(1), 158-184.‏
Francas, D., & Minner, S. (2009). Manufacturing network configuration in supply chains with product recovery. Omega, 37(4), 757-769.‏
Galante, G., Aiello, G., Enea, M., & Panascia, E. (2010). A multi-objective approach to solid waste management. Waste Management, 30(8-9), 1720-1728.‏
Gao, N., & Ryan, S. M. (2014). Robust design of a closed-loop supply chain network for uncertain carbon regulations and random product flows. EURO Journal on Transportation and Logistics, 3(1), 5-34.‏
Garcia, D. J., & You, F. (2015). Multiobjective optimization of product and process networks: General modeling framework, efficient global optimization algorithm, and case studies on bioconversion. AIChE Journal, 61(2), 530-554.‏
Georgiadis, P. (2013). An integrated System Dynamics model for strategic capacity planning in closed-loop recycling networks: A dynamic analysis for the paper industry. Simulation Modelling Practice and Theory, 32, 116-137.‏
Ghaderi, H., Pishvaee, M. S., & Moini, A. (2016). Biomass supply chain network design: an optimization-oriented review and analysis. Industrial crops and products, 94, 972-1000.‏
Ghadge, A., Yang, Q., Caldwell, N., König, C., & Tiwari, M. K. (2016). Facility location for a closed-loop distribution network: a hybrid approach. International Journal of Retail & Distribution Management, 44(9), 884-902.‏
Giarola, S., Shah, N., & Bezzo, F. (2012a). A comprehensive approach to the design of ethanol supply chains including carbon trading effects. Bioresource technology, 107, 175-185.‏
Giarola, S., Zamboni, A., & Bezzo, F. (2011). Spatially explicit multi-objective optimisation for design and planning of hybrid first and second generation biorefineries. Computers & Chemical Engineering, 35(9), 1782-1797.‏
Giarola, S., Zamboni, A., & Bezzo, F. (2012b). Environmentally conscious capacity planning and technology selection for bioethanol supply chains. Renewable Energy, 43, 61-72.‏
Gong, J., & You, F. (2014). Global optimization for sustainable design and synthesis of algae processing network for CO2 mitigation and biofuel production using life cycle optimization. AIChE Journal, 60(9), 3195-3210.‏
Govindan, K., Jafarian, A., & Nourbakhsh, V. (2015a). Bi-objective integrating sustainable order allocation and sustainable supply chain network strategic design with stochastic demand using a novel robust hybrid multi-objective metaheuristic. Computers & Operations Research, 62, 112-130.‏
Govindan, K., Jafarian, A., Khodaverdi, R., & Devika, K. (2014). Two-echelon multiple-vehicle location–routing problem with time windows for optimization of sustainable supply chain network of perishable food. International Journal of Production Economics, 152, 9-28.‏
Govindan, K., Paam, P., & Abtahi, A. R. (2016). A fuzzy multi-objective optimization model for sustainable reverse logistics network design. Ecological Indicators, 67, 753-768.‏
Govindan, K., Soleimani, H., & Kannan, D. (2015b). Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future. European Journal of Operational Research, 240(3), 603-626.‏
Guillén-Gosálbez, G., & Grossmann, I. (2010). A global optimization strategy for the environmentally conscious design of chemical supply chains under uncertainty in the damage assessment model. Computers & Chemical Engineering, 34(1), 42-58.‏
Guillén‐Gosálbez, G., & Grossmann, I. E. (2009). Optimal design and planning of sustainable chemical supply chains under uncertainty. AIChE Journal, 55(1), 99-121.‏
Guillén‐Gosálbez, G., Mele, F. D., & Grossmann, I. E. (2010). A bi‐criterion optimization approach for the design and planning of hydrogen supply chains for vehicle use. AIChE Journal, 56(3), 650-667.‏
Hale, T., & Moberg, C. R. (2005). Improving supply chain disaster preparedness: A decision process for secure site location. International Journal of Physical Distribution & Logistics Management, 35(3), 195-207.‏
Hammond, D., & Beullens, P. (2007). Closed-loop supply chain network equilibrium under legislation. European journal of operational research, 183(2), 895-908.‏
Harraz, N. A., & Galal, N. M. (2011). Design of sustainable end-of-life vehicle recovery network in Egypt. Ain Shams Engineering Journal, 2(3-4), 211-219.‏
Hasani, A., Zegordi, S. H., & Nikbakhsh, E. (2012). Robust closed-loop supply chain network design for perishable goods in agile manufacturing under uncertainty. International Journal of Production Research, 50(16), 4649-4669.‏
Hasani, A., Zegordi, S. H., & Nikbakhsh, E. (2015). Robust closed-loop global supply chain network design under uncertainty: the case of the medical device industry. International Journal of Production Research, 53(5), 1596-1624.‏
Hatefi, S. M., Jolai, F., Torabi, S. A., & Tavakkoli-Moghaddam, R. (2015a). A credibility-constrained programming for reliable forward–reverse logistics network design under uncertainty and facility disruptions. International Journal of Computer Integrated Manufacturing, 28(6), 664-678.‏
Hatefi, S. M., Jolai, F., Torabi, S. A., & Tavakkoli-Moghaddam, R. (2015b). Reliable design of an integrated forward-revere logistics network under uncertainty and facility disruptions: a fuzzy possibilistic programing model. KSCE Journal of Civil Engineering, 19(4), 1117-1128.‏
Hombach, L. E., Cambero, C., Sowlati, T., & Walther, G. (2016). Optimal design of supply chains for second generation biofuels incorporating European biofuel regulations. Journal of cleaner production, 133, 565-575.‏
Hosseini, S., & Barker, K. (2016). A Bayesian network model for resilience-based supplier selection. International Journal of Production Economics, 180, 68-87.‏
Hugo, A., & Pistikopoulos, E. N. (2005). Environmentally conscious long-range planning and design of supply chain networks. Journal of Cleaner Production, 13(15), 1471-1491.‏
Hugo, A., Rutter, P., Pistikopoulos, S., Amorelli, A., & Zoia, G. (2005). Hydrogen infrastructure strategic planning using multi-objective optimization. International Journal of Hydrogen Energy, 30(15), 1523-1534.‏
Jabbarzadeh, A., Fahimnia, B., & Seuring, S. (2014). Dynamic supply chain network design for the supply of blood in disasters: a robust model with real world application. Transportation Research Part E: Logistics and Transportation Review, 70, 225-244.‏
Jamshidi, R., Ghomi, S. F., & Karimi, B. (2012). Multi-objective green supply chain optimization with a new hybrid memetic algorithm using the Taguchi method. Scientia Iranica, 19(6), 1876-1886.‏
Jayaraman, V., Patterson, R. A., & Rolland, E. (2003). The design of reverse distribution networks: models and solution procedures. European journal of operational research, 150(1), 128-149.‏
Jeihoonian, M., Zanjani, M. K., & Gendreau, M. (2016). Accelerating Benders decomposition for closed-loop supply chain network design: Case of used durable products with different quality levels. European Journal of Operational Research, 251(3), 830-845.‏
Jindal, A., & Sangwan, K. S. (2014). Closed loop supply chain network design and optimisation using fuzzy mixed integer linear programming model. International Journal of Production Research, 52(14), 4156-4173.‏
Jindal, A., & Sangwan, K. S. (2017). Multi-objective fuzzy mathematical modelling of closed-loop supply chain considering economical and environmental factors. Annals of Operations Research, 257(1-2), 95-120.‏
Kamalahmadi, M., & Parast, M. M. (2016). A review of the literature on the principles of enterprise and supply chain resilience: Major findings and directions for future research. International Journal of Production Economics, 171, 116-133.‏
Kannan, D., Diabat, A., Alrefaei, M., Govindan, K., & Yong, G. (2012). A carbon footprint based reverse logistics network design model. Resources, conservation and recycling, 67, 75-79.‏
Kannan, G., Sasikumar, P., & Devika, K. (2010). A genetic algorithm approach for solving a closed loop supply chain model: A case of battery recycling. Applied Mathematical Modelling, 34(3), 655-670.‏
Kanzian, C., Kühmaier, M., Zazgornik, J., & Stampfer, K. (2013). Design of forest energy supply networks using multi-objective optimization. Biomass and Bioenergy, 58, 294-302.‏
Kara, S. S., & Onut, S. (2010). A two-stage stochastic and robust programming approach to strategic planning of a reverse supply network: The case of paper recycling. Expert Systems with Applications, 37(9), 6129-6137.‏
Kaur, H., & Singh, S. P. (2016). Sustainable procurement and logistics for disaster resilient supply chain. Annals of Operations Research, 1-46.‏
Kaya, O., & Urek, B. (2016). A mixed integer nonlinear programming model and heuristic solutions for location, inventory and pricing decisions in a closed loop supply chain. Computers & Operations Research, 65, 93-103.‏
Keyvanshokooh, E., Ryan, S. M., & Kabir, E. (2016). Hybrid robust and stochastic optimization for closed-loop supply chain network design using accelerated Benders decomposition. European Journal of Operational Research, 249(1), 76-92.‏
Khatami, M., Mahootchi, M., & Farahani, R. Z. (2015). Benders’ decomposition for concurrent redesign of forward and closed-loop supply chain network with demand and return uncertainties. Transportation Research Part E: Logistics and Transportation Review, 79, 1-21.‏
Kisomi, M. S., Solimanpur, M., & Doniavi, A. (2016). An integrated supply chain configuration model and procurement management under uncertainty: a set-based robust optimization methodology. Applied Mathematical Modelling, 40(17-18), 7928-7947.‏
Klibi, W., Martel, A., & Guitouni, A. (2010). The design of robust value-creating supply chain networks: a critical review. European Journal of Operational Research, 203(2), 283-293.
Kostin, A., Guillén-Gosálbez, G., Mele, F. D., & Jiménez, L. (2012). Identifying key life cycle assessment metrics in the multiobjective design of bioethanol supply chains using a rigorous mixed-integer linear programming approach. Industrial & Engineering Chemistry Research, 51(14), 5282-5291.‏
Krikke, H. (2011). Impact of closed-loop network configurations on carbon footprints: A case study in copiers. Resources, conservation and recycling, 55(12), 1196-1205.‏
Krikke, H., Bloemhof-Ruwaard, J., & Van Wassenhove, L. N. (2003). Concurrent product and closed-loop supply chain design with an application to refrigerators. International journal of production research, 41(16), 3689-3719.‏
Kusumastuti, R. D., Piplani, R., & Lim, G. H. (2008). Redesigning closed-loop service network at a computer manufacturer: A case study. International Journal of Production Economics, 111(2), 244-260.‏
Lam, H. L., Ng, W. P., Ng, R. T., Ng, E. H., Aziz, M. K. A., & Ng, D. K. (2013). Green strategy for sustainable waste-to-energy supply chain. Energy, 57, 4-16.‏
Lam, H. L., Varbanov, P. S., & Klemeš, J. J. (2010). Optimisation of regional energy supply chains utilising renewables: P-graph approach. Computers & Chemical Engineering, 34(5), 782-792.‏
Lee, C. K. M., & Chan, T. M. (2009). Development of RFID-based reverse logistics system. Expert Systems with Applications, 36(5), 9299-9307.‏
Lee, D. H., & Dong, M. (2008). A heuristic approach to logistics network design for end-of-lease computer products recovery. Transportation Research Part E: Logistics and Transportation Review, 44(3), 455-474.‏
Lee, D. H., Dong, M., & Bian, W. (2010). The design of sustainable logistics network under uncertainty. International Journal of Production Economics, 128(1), 159-166.‏
Lee, J. E., Gen, M., & Rhee, K. G. (2009). Network model and optimization of reverse logistics by hybrid genetic algorithm. Computers & Industrial Engineering, 56(3), 951-964.‏
Li, S., Wang, N., Jia, T., He, Z., & Liang, H. (2016). Multiobjective Optimization for Multiperiod Reverse Logistics Network Design. IEEE Transactions on engineering Management, 63(2), 223-236.‏
Lieckens, K., & Vandaele, N. (2007). Reverse logistics network design with stochastic lead times. Computers & Operations Research, 34(2), 395-416.‏
Lieckens, K., & Vandaele, N. (2012). Multi-level reverse logistics network design under uncertainty. International Journal of Production Research, 50(1), 23-40.‏
Liotta, G., Kaihara, T., & Stecca, G. (2016). Optimization and simulation of collaborative networks for sustainable production and transportation. IEEE Transactions on Industrial Informatics, 12(1), 417-424.‏
Lira-Barragán, L. F., Ponce-Ortega, J. M., Nápoles-Rivera, F., Serna-González, M., & El-Halwagi, M. M. (2012). Incorporating property-based water networks and surrounding watersheds in site selection of industrial facilities. Industrial & Engineering Chemistry Research, 52(1), 91-107.‏
Lira-Barragán, L. F., Ponce-Ortega, J. M., Serna-González, M., & El-Halwagi, M. M. (2010). An MINLP model for the optimal location of a new industrial plant with simultaneous consideration of economic and environmental criteria. Industrial & Engineering Chemistry Research, 50(2), 953-964.‏
Listeş, O., & Dekker, R. (2005). A stochastic approach to a case study for product recovery network design. European Journal of Operational Research, 160(1), 268-287.‏
Liu, M., & Zhang, L. (2016, July). A nonlinear mixed-integer programming model for forward/reverse distribution network design. In Control Conference (CCC), 2016 35th Chinese (pp. 2673-2677). IEEE.‏
Liu, P., Whitaker, A., Pistikopoulos, E. N., & Li, Z. (2011). A mixed-integer programming approach to strategic planning of chemical centres: A case study in the UK. Computers & Chemical Engineering, 35(8), 1359-1373.‏
Lu, Z., & Bostel, N. (2007). A facility location model for logistics systems including reverse flows: The case of remanufacturing activities. Computers & Operations Research, 34(2), 299-323.‏
Malczewski, J., & Ogryczak, W. (1990). An interactive approach to the central facility location problem: locating pediatric hospitals in Warsaw. Geographical analysis, 22(3), 244-258.‏
Mallidis, I., Dekker, R., & Vlachos, D. (2012). The impact of greening on supply chain design and cost: a case for a developing region. Journal of Transport Geography, 22, 118-128.‏
Mansour, S., & Zarei, M. (2008). A multi-period reverse logistics optimisation model for end-of-life vehicles recovery based on EU Directive. International Journal of Computer Integrated Manufacturing, 21(7), 764-777.‏
Mari, S. I., Lee, Y. H., & Memon, M. S. (2014). Sustainable and resilient supply chain network design under disruption risks. Sustainability, 6(10), 6666-6686.‏
Marufuzzaman, M., Ekşioğlu, S. D., & Hernandez, R. (2014). Environmentally friendly supply chain planning and design for biodiesel production via wastewater sludge. Transportation Science, 48(4), 555-574.‏
Mayring, P. (2002). Qualitative Sozialforschung. Weinheim: Beltz.‏
Mele, F. D., Guillén-Gosálbez, G., & Jiménez, L. (2009). Optimal planning of supply chains for bioethanol and sugar production with economic and environmental concerns. In Computer aided chemical engineering (Vol. 26, pp. 997-1002). Elsevier.‏
Mele, F. D., Kostin, A. M., Guillén-Gosálbez, G., & Jiménez, L. (2011). Multiobjective model for more sustainable fuel supply chains. A case study of the sugar cane industry in Argentina. Industrial & Engineering Chemistry Research, 50(9), 4939-4958.‏
Melo, M. T., Nickel, S., & Saldanha-Da-Gama, F. (2009). Facility location and supply chain management–A review. European journal of operational research, 196(2), 401-412.‏
Meneghetti, A., & Monti, L. (2015). Greening the food supply chain: an optimisation model for sustainable design of refrigerated automated warehouses. International Journal of Production Research, 53(21), 6567-6587.‏
Metta, H., & Badurdeen, F. (2011, August). Optimized closed-loop supply chain configuration selection for sustainable product designs. In Automation Science and Engineering (CASE), 2011 IEEE Conference on (pp. 438-443). IEEE.‏
Min, H., & Ko, H. J. (2008). The dynamic design of a reverse logistics network from the perspective of third-party logistics service providers. International Journal of Production Economics, 113(1), 176-192.‏
Min, H., Ko, C. S., & Ko, H. J. (2006a). The spatial and temporal consolidation of returned products in a closed-loop supply chain network. Computers & Industrial Engineering, 51(2), 309-320.‏
Min, H., Ko, H. J., & Ko, C. S. (2006b). A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns. Omega, 34(1), 56-69.‏
Minciardi, R., Paolucci, M., Robba, M., & Sacile, R. (2008). Multi-objective optimization of solid waste flows: Environmentally sustainable strategies for municipalities. Waste Management, 28(11), 2202-2212.‏
Miret, C., Chazara, P., Montastruc, L., Negny, S., & Domenech, S. (2016). Design of bioethanol green supply chain: Comparison between first and second generation biomass concerning economic, environmental and social criteria. Computers & Chemical Engineering, 85, 16-35.‏
Mohammadi, M., Torabi, S. A., & Tavakkoli-Moghaddam, R. (2014). Sustainable hub location under mixed uncertainty. Transportation Research Part E: Logistics and Transportation Review, 62, 89-115.‏
Mohseni, S., & Pishvaee, M. S. (2016). A robust programming approach towards design and optimization of microalgae-based biofuel supply chain. Computers & Industrial Engineering, 100, 58-71.‏
Mota, B., Gomes, M. I., Carvalho, A., & Barbosa-Povoa, A. P. (2015). Towards supply chain sustainability: economic, environmental and social design and planning. Journal of Cleaner Production, 105, 14-27.‏
Muñoz, E., Capón-García, E., Laínez, J. M., Espuña, A., & Puigjaner, L. (2013). Considering environmental assessment in an ontological framework for enterprise sustainability. Journal of cleaner production, 47, 149-164.‏
Nagurney, A., & Masoumi, A. H. (2012). Supply chain network design of a sustainable blood banking system. In Sustainable supply chains (pp. 49-72). Springer, New York, NY.‏
Nagurney, A., Masoumi, A. H., & Yu, M. (2012). Supply chain network operations management of a blood banking system with cost and risk minimization. Computational Management Science, 9(2), 205-231.‏
Neto, J. Q. F., Bloemhof-Ruwaard, J. M., van Nunen, J. A., & van Heck, E. (2008). Designing and evaluating sustainable logistics networks. International Journal of Production Economics, 111(2), 195-208.‏
Neumüller, C., Lasch, R., & Kellner, F. (2016). Integrating sustainability into strategic supplier portfolio selection. Management Decision, 54(1), 194-221.‏
Nouira, I., Hammami, R., Frein, Y., & Temponi, C. (2016). Design of forward supply chains: Impact of a carbon emissions-sensitive demand. International Journal of Production Economics, 173, 80-98.‏
Ouhader, H., & Elkyal, M. (2016, May). A two-echelon location-routing model for designing a pooled distribution supply chain. In Logistics Operations Management (GOL), 2016 3rd International Conference on (pp. 1-9). IEEE.‏
Özceylan, E., & Paksoy, T. (2013a). A mixed integer programming model for a closed-loop supply-chain network. International Journal of Production Research, 51(3), 718-734.‏
Özceylan, E., & Paksoy, T. (2013b). Fuzzy multi-objective linear programming approach for optimising a closed-loop supply chain network. International Journal of Production Research, 51(8), 2443-2461.‏
Özceylan, E., Demirel, N., Çetinkaya, C., & Demirel, E. (2017). A closed-loop supply chain network design for automotive industry in Turkey. Computers & Industrial Engineering, 113, 727-745.‏
Özkır, V., & Başlıgil, H. (2013). Multi-objective optimization of closed-loop supply chains in uncertain environment. Journal of Cleaner Production, 41, 114-125.‏
Papapostolou, C., Kondili, E., & Kaldellis, J. K. (2011). Development and implementation of an optimisation model for biofuels supply chain. Energy, 36(10), 6019-6026.‏
Papapostolou, C., Kondili, E., Kaldellis, I. K., & Früh, W. G. (2015). Energy Supply Chain modeling for the optimisation of a large scale energy planning problem. In Computer Aided Chemical Engineering (Vol. 37, pp. 2297-2302). Elsevier.‏
Pati, R. K., Vrat, P., & Kumar, P. (2008). A goal programming model for paper recycling system. Omega, 36(3), 405-417.‏
Pati, R., Jans, R., & Tyagi, R. K. (2013). Green logistics network design: A critical review. In 24th Annual POMS conference, Denver, USA (Vol. 25).‏
Peng, Z. Y., & Zhong, D. Y. (2007, June). Optimization model for closed-loop logistics network design in manufacturing and remanufacturing system. In Service Systems and Service Management, 2007 International Conference on (pp. 1-4). IEEE.‏
Pérez-Fortes, M., Laínez-Aguirre, J. M., Arranz-Piera, P., Velo, E., & Puigjaner, L. (2012). Design of regional and sustainable bio-based networks for electricity generation using a multi-objective MILP approach. Energy, 44(1), 79-95.‏
Pettit, T. J., Croxton, K. L., & Fiksel, J. (2013). Ensuring supply chain resilience: development and implementation of an assessment tool. Journal of business logistics, 34(1), 46-76.‏
Pinto-Varela, T., Barbosa-Póvoa, A. P. F., & Novais, A. Q. (2011). Bi-objective optimization approach to the design and planning of supply chains: economic versus environmental performances. Computers & Chemical Engineering, 35(8), 1454-1468.‏
Piplani, R., & Saraswat, A. (2012). Robust optimisation approach to the design of service networks for reverse logistics. International Journal of Production Research, 50(5), 1424-1437.‏
Pishvaee, M. S., & Razmi, J. (2012). Environmental supply chain network design using multi-objective fuzzy mathematical programming. Applied Mathematical Modelling, 36(8), 3433-3446.‏
Pishvaee, M. S., & Torabi, S. A. (2010). A possibilistic programming approach for closed-loop supply chain network design under uncertainty. Fuzzy sets and systems, 161(20), 2668-2683.‏
Pishvaee, M. S., Farahani, R. Z., & Dullaert, W. (2010a). A memetic algorithm for bi-objective integrated forward/reverse logistics network design. Computers & operations research, 37(6), 1100-1112.‏
Pishvaee, M. S., Jolai, F., & Razmi, J. (2009). A stochastic optimization model for integrated forward/reverse logistics network design. Journal of Manufacturing Systems, 28(4), 107-114.‏
Pishvaee, M. S., Kianfar, K., & Karimi, B. (2010b). Reverse logistics network design using simulated annealing. The International Journal of Advanced Manufacturing Technology, 47(1-4), 269-281.‏
Pishvaee, M. S., Rabbani, M., & Torabi, S. A. (2011). A robust optimization approach to closed-loop supply chain network design under uncertainty. Applied Mathematical Modelling, 35(2), 637-649.‏
Pishvaee, M. S., Razmi, J., & Torabi, S. A. (2012a). Robust possibilistic programming for socially responsible supply chain network design: A new approach. Fuzzy sets and systems, 206, 1-20.‏
Pishvaee, M. S., Torabi, S. A., & Razmi, J. (2012b). Credibility-based fuzzy mathematical programming model for green logistics design under uncertainty. Computers & Industrial Engineering, 62(2), 624-632.‏
Pochampally, K. K., & Gupta, S. M. (2008). A multiphase fuzzy logic approach to strategic planning of a reverse supply chain network. IEEE Transactions on Electronics Packaging Manufacturing, 31(1), 72-82.‏
Pourmohammadi, H., Rahimi, M., & Dessouky, M. (2008, January). Sustainable reverse logistics for distribution of industrial waste/byproducts: A joint optimization of operation and environmental costs. In Supply Chain Forum: An International Journal (Vol. 9, No. 1, pp. 2-17). Taylor & Francis.‏
Pozo, C., Ruiz-Femenia, R., Caballero, J., Guillén-Gosálbez, G., & Jiménez, L. (2012). On the use of Principal Component Analysis for reducing the number of environmental objectives in multi-objective optimization: application to the design of chemical supply chains. Chemical Engineering Science, 69(1), 146-158.‏
Qi, Z., & Hongcheng, W. (2008, December). Research on construction mode of recycling network of reverse logistics of automobile enterprises. In Information Management, Innovation Management and Industrial Engineering, 2008. ICIII'08. International Conference on (Vol. 3, pp. 36-40). IEEE.‏
Qin, Z., & Ji, X. (2010). Logistics network design for product recovery in fuzzy environment. European Journal of Operational Research, 202(2), 479-490.‏
Rajesh, R., & Ravi, V. (2015). Supplier selection in resilient supply chains: a grey relational analysis approach. Journal of Cleaner Production, 86, 343-359.‏
Ramezani, M., Bashiri, M., & Tavakkoli-Moghaddam, R. (2013a). A new multi-objective stochastic model for a forward/reverse logistic network design with responsiveness and quality level. Applied Mathematical Modelling, 37(1-2), 328-344.‏
Ramezani, M., Bashiri, M., & Tavakkoli-Moghaddam, R. (2013b). A robust design for a closed-loop supply chain network under an uncertain environment. The International Journal of Advanced Manufacturing Technology, 66(5-8), 825-843.‏
Ramezani, M., Kimiagari, A. M., & Karimi, B. (2014). Closed-loop supply chain network design: A financial approach. Applied Mathematical Modelling, 38(15-16), 4099-4119.‏
Ramudhin, A., Chaabane, A., & Paquet, M. (2010). Carbon market sensitive sustainable supply chain network design. International Journal of Management Science and Engineering Management, 5(1), 30-38.‏
Realff, M. J., Ammons, J. C., & Newton, D. (2000). Strategic design of reverse production systems. Computers & Chemical Engineering, 24(2-7), 991-996.‏
Realff, M. J., Ammons, J. C., & Newton, D. J. (2004). Robust reverse production system design for carpet recycling. Iie Transactions, 36(8), 767-776.‏
Ruimin, M. A., Lifei, Y. A. O., Maozhu, J. I. N., Peiyu, R. E. N., & Zhihan, L. V. (2016). Robust environmental closed-loop supply chain design under uncertainty. Chaos, Solitons & Fractals, 89, 195-202.‏
Ruiz-Femenia, R., Guillén-Gosálbez, G., Jiménez, L., & Caballero, J. A. (2013). Multi-objective optimization of environmentally conscious chemical supply chains under demand uncertainty. Chemical Engineering Science, 95, 1-11.‏
Sadrnia, A., Ismail, N., Zulkifli, N., Ariffin, M. K. A., Nezamabadi-pour, H., & Mirabi, H. (2013). A multiobjective optimization model in automotive supply chain networks. Mathematical Problems in Engineering, 2013.‏
Saffar, M. H. S. G., & Razmi, J. (2015). A new multi objective optimization model for designing a green supply chain network under uncertainty. International Journal of Industrial Engineering Computations, 6(1), 15-32.‏
Saffar, M., & Razmi, J. (2014). A new bi-objective mixed integer linear programming for designing a supply chain considering CO2 emission. Uncertain Supply Chain Management, 2(4), 275-292.‏
Saif, A., & Elhedhli, S. (2016). Cold supply chain design with environmental considerations: A simulation-optimization approach. European Journal of Operational Research, 251(1), 274-287.‏
Salema, M. I. G., Barbosa-Povoa, A. P., & Novais, A. Q. (2007). An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty. European Journal of Operational Research, 179(3), 1063-1077.‏
Salema, M. I. G., Barbosa-Povoa, A. P., & Novais, A. Q. (2010). Simultaneous design and planning of supply chains with reverse flows: A generic modelling framework. European journal of operational research, 203(2), 336-349.‏
Salema, M. I. G., Póvoa, A. P. B., & Novais, A. Q. (2009). A strategic and tactical model for closed-loop supply chains. OR spectrum, 31(3), 573-599.‏
Salema, M. I., Povoa, A. P. B., & Novais, A. Q. (2006). A warehouse-based design model for reverse logistics. Journal of the Operational Research Society, 57(6), 615-629.‏
Santibañez-Aguilar, J. E., González-Campos, J. B., Ponce-Ortega, J. M., Serna-González, M., & El-Halwagi, M. M. (2014). Optimal planning and site selection for distributed multiproduct biorefineries involving economic, environmental and social objectives. Journal of cleaner production, 65, 270-294.‏
Santibañez-Aguilar, J. E., Morales-Rodriguez, R., González-Campos, J. B., & Ponce-Ortega, J. M. (2016). Stochastic design of biorefinery supply chains considering economic and environmental objectives. Journal of cleaner production, 136, 224-245.‏
Sasikumar, P., Kannan, G., & Haq, A. N. (2010). A multi-echelon reverse logistics network design for product recovery—a case of truck tire remanufacturing. The International Journal of Advanced Manufacturing Technology, 49(9-12), 1223-1234.‏
Saunders, M., Lewis, P., & Thornhill, A. (2012). Research methods for business students (6th ed.). Pearson education.‏
Schweiger, K., & Sahamie, R. (2013). A hybrid Tabu Search approach for the design of a paper recycling network. Transportation Research Part E: Logistics and Transportation Review, 50, 98-119.‏
Seuring, S., & Gold, S. (2012). Conducting content-analysis based literature reviews in supply chain management. Supply Chain Management: An International Journal, 17(5), 544-555.‏
Shaw, K., Irfan, M., Shankar, R., & Yadav, S. S. (2016). Low carbon chance constrained supply chain network design problem: a Benders decomposition based approach. Computers & Industrial Engineering, 98, 483-497.‏
Sherafati, M., & Bashiri, M. (2016). Closed loop supply chain network design with fuzzy tactical decisions. Journal of Industrial Engineering International, 12(3), 255-269.‏
Sheu, J. B. (2007). A coordinated reverse logistics system for regional management of multi-source hazardous wastes. Computers & Operations Research, 34(5), 1442-1462.‏
Shi, J., Li, D., Zhou, Y., & Dang, S. (2016, July). An integrated approach for sustainable container supply chain design and evaluation—A simulation approach with case study. In Logistics, Informatics and Service Sciences (LISS), 2016 International Conference on (pp. 1-6). IEEE.‏
Shi, L., Fan, H., Gao, P., & Zhang, H. (2009, October). Network model and optimization of medical waste reverse logistics by improved genetic algorithm. In International Symposium on Intelligence Computation and Applications (pp. 40-52). Springer, Berlin, Heidelberg.‏
Shih, L. H. (2001). Reverse logistics system planning for recycling electrical appliances and computers in Taiwan. Resources, conservation and recycling, 32(1), 55-72.‏
Sim, E., Jung, S., Kim, H., & Park, J. (2004, June). A generic network design for a closed-loop supply chain using genetic algorithm. In Genetic and Evolutionary Computation Conference (pp. 1214-1225). Springer, Berlin, Heidelberg.‏
Simchi-Levi, D., Kaminsky, P., Simchi-Levi, E., & Shankar, R. (2000). Designing and managing the supply chain: concepts, strategies and case studies. Tata McGraw-Hill Education.‏
Sitek, P., & Wikarek, J. (2015). A hybrid framework for the modelling and optimisation of decision problems in sustainable supply chain management. International Journal of Production Research, 53(21), 6611-6628.‏
Slaper, T. F., & Hall, T. J. (2011). The triple bottom line: What is it and how does it work. Indiana business review, 86(1), 4-8.‏
Soleimani, H., Seyyed-Esfahani, M., & Kannan, G. (2014). Incorporating risk measures in closed-loop supply chain network design. International Journal of Production Research, 52(6), 1843-1867.‏
Soleimani, H., Seyyed-Esfahani, M., & Shirazi, M. A. (2013). Designing and planning a multi-echelon multi-period multi-product closed-loop supply chain utilizing genetic algorithm. The International Journal of Advanced Manufacturing Technology, 68(1-4), 917-931.‏
Soleimani, H., Seyyed-Esfahani, M., & Shirazi, M. A. (2016). A new multi-criteria scenario-based solution approach for stochastic forward/reverse supply chain network design. Annals of Operations Research, 242(2), 399-421.‏
Sohrabi, T., Etemad, M., & Fathi, M. R. (2018) Mathematical modeling of Green closed loop supply chain network with consideration of supply risk: Case Study, Journal of Advances in Mathematical Modeling,7(2), 103-122.
Soufali, A., & Bashiri, M. (2016, December). A comprehensive closed loop supply chain model; environmental, technology and energy concerns. In Industrial Engineering and Engineering Management (IEEM), 2016 IEEE International Conference on (pp. 1498-1502). IEEE.‏
Srivastava, S. K. (2008). Network design for reverse logistics. Omega, 36(4), 535-548.‏
Subramanian, P., Ramkumar, N., & Narendran, T. T. (2010). Mathematical model for multi-echelon, multi-product, single time-period closed loop supply chain. International Journal of Business Performance and Supply Chain Modelling, 2(3-4), 216-236.‏
Subulan, K., Taşan, A. S., & Baykasoğlu, A. (2015). Designing an environmentally conscious tire closed-loop supply chain network with multiple recovery options using interactive fuzzy goal programming. Applied Mathematical Modelling, 39(9), 2661-2702.‏
Talaei, M., Moghaddam, B. F., Pishvaee, M. S., Bozorgi-Amiri, A., & Gholamnejad, S. (2016). A robust fuzzy optimization model for carbon-efficient closed-loop supply chain network design problem: a numerical illustration in electronics industry. Journal of Cleaner Production, 113, 662-673.‏
Tang, C. S. (2006). Perspectives in supply chain risk management. International journal of production economics, 103(2), 451-488.‏
Tanimizu, Y., & Amano, K. (2016). Integrated production and transportation scheduling for multi-objective green supply chain network design. Procedia CIRP, 57(1), 152-157.‏
Tofighi, S., Torabi, S. A., & Mansouri, S. A. (2016). Humanitarian logistics network design under mixed uncertainty. European Journal of Operational Research, 250(1), 239-250.‏
Torabi, S. A., Namdar, J., Hatefi, S. M., & Jolai, F. (2016). An enhanced possibilistic programming approach for reliable closed-loop supply chain network design. International Journal of Production Research, 54(5), 1358-1387.‏
Tsao, Y. C., Linh, V. T., & Lu, J. C. (2017). Closed-loop supply chain network designs considering RFID adoption. Computers & Industrial Engineering, 113, 716-726.‏
Tukamuhabwa, B. R., Stevenson, M., Busby, J., & Zorzini, M. (2015). Supply chain resilience: definition, review and theoretical foundations for further study. International Journal of Production Research, 53(18), 5592-5623.‏
Tuzkaya, G., Gülsün, B., & Önsel, Ş. (2011). A methodology for the strategic design of reverse logistics networks and its application in the Turkish white goods industry. International Journal of Production Research, 49(15), 4543-4571.‏
Üster, H., Easwaran, G., Akçali, E., & Çetinkaya, S. (2007). Benders decomposition with alternative multiple cuts for a multi‐product closed‐loop supply chain network design model. Naval Research Logistics (NRL), 54(8), 890-907.‏
Van Der Vorst, J. G., Tromp, S. O., & Zee, D. J. V. D. (2009). Simulation modelling for food supply chain redesign; integrated decision making on product quality, sustainability and logistics. International Journal of Production Research, 47(23), 6611-6631.‏
Van Nguyen, T., Zhou, L., & Lin, Y. (2016, July). A multi-objective, multi-product and multi-transportation mode sustainable closed-loop supply chain network design. In Logistics, Informatics and Service Sciences (LISS), 2016 International Conference on (pp. 1-6). IEEE.‏
Vance, L., Heckl, I., Bertok, B., Cabezas, H., & Friedler, F. (2015). Designing sustainable energy supply chains by the P-graph method for minimal cost, environmental burden, energy resources input. Journal of Cleaner Production, 94, 144-154.‏
Verma, M., Gendreau, M., & Laporte, G. (2013). Optimal location and capability of oil-spill response facilities for the south coast of Newfoundland. Omega, 41(5), 856-867.‏
Vidal, C. J., & Goetschalckx, M. (1997). Strategic production-distribution models: A critical review with emphasis on global supply chain models. European journal of operational research, 98(1), 1-18.‏
Vidović, M., Ratković, B., Bjelić, N., & Popović, D. (2016). A two-echelon location-routing model for designing recycling logistics networks with profit: MILP and heuristic approach. Expert Systems with Applications, 51, 34-48.‏
Wang, F., Lai, X., & Shi, N. (2011). A multi-objective optimization for green supply chain network design. Decision Support Systems, 51(2), 262-269.‏
Wang, H. F., & Hsu, H. W. (2010a). A closed-loop logistic model with a spanning-tree based genetic algorithm. Computers & operations research, 37(2), 376-389.‏
Wang, H. F., & Hsu, H. W. (2010b). Resolution of an uncertain closed-loop logistics model: An application to fuzzy linear programs with risk analysis. Journal of environmental management, 91(11), 2148-2162.‏
Wang, Y., Lu, T., & Zhang, C. (2013). Integrated logistics network design in hybrid manufacturing/remanufacturing system under low-carbon restriction. In LISS 2012 (pp. 111-121). Springer, Berlin, Heidelberg.‏
World Commission on Environment and Development. (1987). Report of the world commission on environment and development: Our common future. Published as Annex to General Assembly document A/42/427.‏
Xanthopoulos, A., & Iakovou, E. (2009). On the optimal design of the disassembly and recovery processes. Waste Management, 29(5), 1702-1711.‏
Xifeng, T., Ji, Z., & Peng, X. (2013). A multi-objective optimization model for sustainable logistics facility location. Transportation Research Part D: Transport and Environment, 22, 45-48.‏
Yang, J., Guo, J., & Ma, S. (2016). Low-carbon city logistics distribution network design with resource deployment. Journal of Cleaner Production, 119, 223-228.‏
Yi, P., Huang, M., Guo, L., & Shi, T. (2016). A retailer oriented closed-loop supply chain network design for end of life construction machinery remanufacturing. Journal of Cleaner Production, 124, 191-203.‏
Yongsheng, Z., & Shouyang, W. (2008). Generic model of reverse logistics network design. Journal of transportation systems engineering and information technology, 8(3), 71-78.‏
You, F., & Wang, B. (2011). Life cycle optimization of biomass-to-liquid supply chains with distributed–centralized processing networks. Industrial & Engineering Chemistry Research, 50(17), 10102-10127.‏
You, F., Tao, L., Graziano, D. J., & Snyder, S. W. (2012). Optimal design of sustainable cellulosic biofuel supply chains: multiobjective optimization coupled with life cycle assessment and input–output analysis. AIChE Journal, 58(4), 1157-1180.‏
Yu, H., & Solvang, W. D. (2016). A general reverse logistics network design model for product reuse and recycling with environmental considerations. The International Journal of Advanced Manufacturing Technology, 87(9-12), 2693-2711.‏
Yue, D., & You, F. (2016). Optimal supply chain design and operations under multi‐scale uncertainties: Nested stochastic robust optimization modeling framework and solution algorithm. AIChE Journal, 62(9), 3041-3055.‏
Yue, D., Kim, M. A., & You, F. (2013). Design of sustainable product systems and supply chains with life cycle optimization based on functional unit: general modeling framework, mixed-integer nonlinear programming algorithms and case study on hydrocarbon biofuels. ACS Sustainable Chemistry & Engineering, 1(8), 1003-1014.‏
Yue, D., Slivinsky, M., Sumpter, J., & You, F. (2014). Sustainable design and operation of cellulosic bioelectricity supply chain networks with life cycle economic, environmental, and social optimization. Industrial & Engineering Chemistry Research, 53(10), 4008-4029.‏
Zamboni, A., Shah, N., & Bezzo, F. (2009). Spatially explicit static model for the strategic design of future bioethanol production systems. 1. Cost minimization. Energy & fuels, 23(10), 5121-5133.‏
Zandieh, M., & Chensebli, A. (2016). Reverse logistics network design: a water flow-like algorithm approach. Opsearch, 53(4), 667-692.‏
Zarei, M., Mansour, S., Husseinzadeh Kashan, A., & Karimi, B. (2010). Designing a reverse logistics network for end-of-life vehicles recovery. Mathematical Problems in Engineering, 2010.‏
Zhalechian, M., Tavakkoli-Moghaddam, R., Zahiri, B., & Mohammadi, M. (2016). Sustainable design of a closed-loop location-routing-inventory supply chain network under mixed uncertainty. Transportation Research Part E: Logistics and Transportation Review, 89, 182-214.‏
Zhang, M., Wiegmans, B., & Tavasszy, L. (2013). Optimization of multimodal networks including environmental costs: a model and findings for transport policy. Computers in industry, 64(2), 136-145.‏
Zhang, S., Lee, C. K. M., Wu, K., & Choy, K. L. (2016). Multi-objective optimization for sustainable supply chain network design considering multiple distribution channels. Expert Systems with Applications, 65, 87-99.‏
Zhao, X. G., & Li, A. (2016). A multi-objective sustainable location model for biomass power plants: Case of China. Energy, 112, 1184-1193.‏
Zhou, G., & Min, H. (2011). Designing a closed-loop supply chain with stochastic product returns: a Genetic Algorithm approach. International Journal of Logistics Systems and Management, 9(4), 397-418.‏
Zhou, X., & Zhou, Y. (2015). Designing a multi-echelon reverse logistics operation and network: A case study of office paper in Beijing. Resources, Conservation and Recycling, 100, 58-69.‏
Zhu, X., & Xiuquan, X. U. (2013). An integrated optimization model of a closed-loop supply chain under uncertainty. In LISS 2012 (pp. 1389-1395). Springer, Berlin, Heidelberg.‏
Zhuang, Y., Zhao, H., & Zhang, C. (2016, November). Multiobjective Optimization for forward and Reverse Logistics Network Design in Rural Areas. In e-Business Engineering (ICEBE), 2016 IEEE 13th International Conference on (pp. 316-321). IEEE.‏
Zohal, M., & Soleimani, H. (2016). Developing an ant colony approach for green closed-loop supply chain network design: a case study in gold industry. Journal of Cleaner Production, 133, 314-337.‏